304 stainless steel belt is very good in rust resistance and high temperature resistance, so it is favored by many users. Because of its many appearance processing methods, it is applicable to the common appearance processing methods on the market. Now we will introduce its common appearance processing methods.
1. Dry grinding and drawing
There are two main types of dry wire drawing, namely long wire and short wire. After dry grinding and wire drawing, 304 stainless steel belt has a strong decorative effect, which can meet the needs of stainless steel in general decoration.
Especially after sanding, it can form a good effect. Because of the low price, simple operation and wide range of use of this type of processing method, many stainless steels that require filaments and short filaments are made of 304 steel.
2. Oil mill wire drawing
The 304 stainless steel strip after oil grinding and drawing can show an excellent decorative effect, especially on the panels of home appliances, elevators, etc., this process needs to be used. At present, some processing plants use hot-rolled 304 stainless steel strips for oil-based sanding, and there is also a cold-rolled oil mill.
3. 8K processing
Through practice, it is found that 304 stainless steel strip performs better than 200 series stainless steel strip in 8K processing. After 2B cold rolling and 8K grinding, the surface of the product can show a mirror effect. At present, the 8K grinding process of nitric acid and iron oxide red is mostly used on the market. This process has low cost and is very popular.
4. Titanium
In many high-end decorations, we can also find 304 stainless steel strips, especially in titanium decoration, it can play a magnificent effect.
It can be seen from the above that there are many surface processing methods of 304 stainless steel strip, which can be processed into various processes in combination with the environment of use.