1. Correct installation
When 304 stainless steel coil bright annealed 2B surface is installed, the output shaft of the conveyor must be kept parallel to the input shaft of the transmission box, which can be solved by adjusting the position of the conveyor on the frame, and the installation position of the stainless steel belt should be the same as that of the mesh belt. The wheel is vertical, because the steel belt transmission relies on its two sides to transmit power, and the correct installation can prolong its service life.
2. Reasonable replacement
When replacing the 304 stainless steel coil bright annealed 2B surface, it must be replaced in groups, and the steel belt cannot be added or reduced arbitrarily, and the specification and model of the steel belt should be considered when replacing the steel belt.
3. Avoid harsh environmental factors
304 stainless steeL coil bright annealed 2B surface should be avoided in the environment of oil and water pollution and hot sun exposure, otherwise it will affect the performance of the steel strip, and it will easily deteriorate over time and shorten the service life, so 304 stainless steeL coil bright annealed 2B surface Should try to avoid sun exposure, in a dry environment, to prevent the aging deterioration of the steel strip