What are the common problems in the processing of 4mm thick NO.1 finish 304 stainless steel checkered plate? We know that stainless steel products are closely related to our lives. Stainless steel water cups, stainless steel tableware, stainless steel doors and windows, etc. are all common stainless steel processing products. Today, Xiaobian will introduce them. Let's take a look at the common problems of 4mm thick NO.1 finish 304 stainless steel checkered plate processing.
Stainless steel processing requires the selection of stainless steel plates. Due to the problems of stainless steel plates, the processed products will have more or less problems.
Common problems include uneven thickness of stainless steel plates, uneven wire drawing, thickness error exceeding the allowable range, and failure of corrosion resistance, heat resistance, and compression resistance. This quality problem directly threatens construction and production safety, so we should face it correctly. right.
4mm thick NO.1 finish 304 stainless steel checkered plate processing is used in different industries, stainless steel materials are different, and its quality standards are also different. At present, in addition to the stainless steel plates produced by domestic manufacturers, there are also foreign stainless steel plates in the stainless steel market. Stainless steel brands vary in quality. With strict market supervision, there are different requirements for the quality of stainless steel plates used in different industries.
1. Seasons alternate, because of the thermal expansion and contraction of steel, the surface of stainless steel will be affected by the external temperature when it is naturally cooled.
2. During the rolling process, due to the high temperature, the surface of the stainless steel will be carbonized. If it cannot be removed in time, it will accumulate on the surface of the 304 stainless steel pipe, and indentations will be formed after rolling.
3. The influence of the production environment of stainless steel plate in the processing of 4mm thick NO.1 finish 304 stainless steel checkered plate, after a long time of processing, a lot of oil, carbon black and dust and other debris will accumulate on the convection plate and furnace table. If it is not cleaned in time, it will also fall on the surface of the stainless steel plate. In the production process, if it is processed into stainless steel pipes or other stainless steel profiles in places where the stainless steel sheet is contaminated, it will cause great damage to the stainless steel.