The sales network of stainless steel pipes is all over the country, and stainless steel pipes start from the factory and need to be transported to various cities. There are usually cooperative transportation companies who will arrange corresponding vehicle transportation, which involves the inspection of stainless steel pipes after they arrive. Expert agents and engineering companies know how to inspect the goods. Based on their experience, they have summarized the following points for you:
When receiving the goods, both the stainless steel pipe agent and the stainless steel pipe engineer should check whether the stainless steel pipe is damaged during transportation. The procedure for inspecting the pipes at the time of delivery is generally as follows:
1. Before unloading, the appearance inspection must be carried out. For example, whether the packaging of the stainless steel pipe is in good condition and not damaged; when unloading, the appearance inspection shall be carried out again to confirm whether the stainless steel pipe has suffered accidental damage during transportation.
2. The stainless steel pipe may be improperly handled in each link of unloading, transportation or stacking, resulting in damage or depression of the stainless steel pipe. In general, the outer surface of each pipe should be inspected for damage.
3. Stainless steel pipe agents or engineering companies should check the quantity of stainless steel pipes according to the bill of lading to avoid missing or wrong delivery quantities.
4. Store the stainless steel pipes found to be damaged separately from other pipes, and should not handle them without authorization. The above are the matters that should be paid attention to during the inspection of stainless steel pipes. In addition, what should be paid attention to when transporting and storing stainless steel pipes?
1. There should be special storage racks for stainless steel pipes. The storage racks should be wooden or painted carbon steel brackets or cushioned with rubber pads to isolate them from other metal materials such as carbon steel. During storage, the storage location should be easy to lift and transport, relatively isolated from other material storage areas, and protective measures should be taken to avoid dust, oil, and rust contamination of stainless steel.
2. When hoisting stainless steel pipes, special slings, such as hoisting belts, should be used. It is strictly forbidden to use steel wire ropes to avoid scratching the surface; and when hoisting and placing, impact and bumping should be avoided.
3. When transporting stainless steel pipes, use transportation tools (such as trolleys, battery cars, etc.), and should be clean and have isolation protection measures to prevent dust, oil, and rust from contaminating stainless steel. Procrastination is strictly prohibited to avoid bumps and scratches.