We know that China 0.6mm thickness ppgi prepainted galvanized steel coil is easy to rust in air and water, but as long as it is used in a dry environment, its service life is relatively long. Due to its many uses, its sales have remained high. In order to meet the needs of production, general manufacturers have some precautions and processing methods that deserve attention during production.
Generally speaking, the width of China 0.6mm thickness ppgi prepainted galvanized steel coil is generally controlled within 1300mm. As for the length, there is no clear regulation. The length and size of each coil can be different. According to the thickness of the sheet, it can be divided into thick strip steel and thin strip steel, in which the thin-thickness is divided into 4mm as the dividing line, and according to the width, it can be divided into wide steel strip and narrow steel strip, of which the width is 600 mm as the dividing line .
There are two main methods of processing China 0.6mm thickness ppgi prepainted galvanized steel coil, namely hot rolling and cold rolling. The following points should be paid attention to during production:
1. Before starting work, it is necessary to check whether the electrical parts and rotating parts of the production equipment are safe and reliable.
2. At the work site, the environment should be tidy, the materials stacked on the site should be neat, and obstacles should not be stacked on the passage.
3. Staff must wear work clothes and protective gear when necessary.
4. During the processing, it is strictly forbidden to touch the China 0.6mm thickness ppgi prepainted galvanized steel coil and the rotating parts with hands to avoid accidents.
5. When using a crane, you should follow the operating procedures one by one, check whether the wire rope is complete, and whether the hook is hooked. When hanging the steel belt, care should be taken to prevent it from falling.