How to distinguish the material of brushed stainless steel plate?

Brushed stainless steel plate is an effect obtained after surface treatment. The surface of stainless steel forms a metallic luster through drawing, frosting and other processes. Because of the high gloss of this metal, it is called brushed plate.

Brushed plate is a stainless steel plate with a relatively high-end appearance. It not only has good corrosion resistance, but its surface texture is also very clear and natural. It is widely used in our lives, such as kitchen cabinets, bathroom cabinets and other places are made of this material.

Brushed stainless steel plate refers to the use of surface treatment technology to process the surface of stainless steel into a filamentous texture effect. The surface is matte. If you observe carefully, you can see that there are traces of texture on the surface of the stainless steel, but you cannot touch it with your hands.

Stainless steel that has been brushed is more wear-resistant than bright stainless steel and looks more upscale.

Brushed stainless steel plate is the most popular surface treatment process in the stainless steel industry today. Usually, the stainless steel surface is used with a wire drawing machine to repair and restore the scratched locations and welds, ultimately achieving an overall wire drawing effect on the stainless steel surface.

Firest. How to distinguish the material of brushed stainless steel plate?

1. According to the color, the common black belongs to the austenite series; while the gold belongs to the martensitic series.

2. According to the surface condition, the surface with mirror effect is called mirror panel; the surface with matte effect is called matte board or frosted board.

3. Generally speaking, when viewed from the cross-section, 3D tempered glass has a strong 3D three-dimensional effect; ordinary tempered glass has a strong flat feeling.

Second. How to choose the size that suits you?

1. Generally speaking, for plates with a thickness of more than 4mm, you can use a plate with a thickness of more than 8mm. For a plate with a thickness of less than 8mm, you can use a 6mm thick plate as the door core. For a plate with a thickness of less than 2mm, you can use a 4mm thick plate as the inner floor.

2. For door frames with a width less than 800cm and door leaves with a wall thickness less than 12cm, it is better to use large-sized plates. The one with a strong 3D stereoscopic effect is 3D tempered glass; the one with a strong flat feeling is ordinary tempered glass!

3. How to distinguish the difference between 304l and 201? 201 is a type of stainless steel, and 304l is a higher grade steel than 304 and 316. The difference between the two lies in the carbon content. The higher the carbon content, the higher the grade of steel. The higher the hardness, the greater the carbon content. The carbon content of 304l is 0.4%, and the carbon content of 201 is 0.3%~0.6%.

4. The difference between 316l and 304. 316l is a new generation of stainless steel product after 304. It is an internationally recognized food-grade stainless steel. 316 is a ferritic stainless steel product with a nickel content of 16.8% or more. No.; 316 is equivalent to China's 0cr18ni9, where "n" represents nitride and "r" represents the low carbon equivalent number. 0cr19ni9 is divided into several grades according to the composition and content: 017, 18-low alloy high-strength structural steel 17 -2 High strength structural steel 22 - High toughness structure 31 - Ultra high strength cold work die steel 48 - Ultra high toughness cold work die steel 56 - Easy cutting tool use.