With the development of economy, Bright White 6mm Thick 304 Stainless Steel Chequered Plate is used more and more widely. Many products in our daily life are related to it, but many people don't know much about its performance and master its maintenance. Even less maintenance.
I believe that there are still many people in life who think that stainless steel will not rust. In fact, stainless steel is also corroded. The reason why its corrosion resistance is better is mainly because there is a layer of purification film on its surface. It exists in a relatively stable oxide form. When the conditions of use are different, the oxidation level in the environment changes, and oxidation corrosion will inevitably occur.
The surface of Bright White 6mm Thick 304 Stainless Steel Chequered Plate exposed to corrosive environment will undergo electrochemical reaction or chemical reaction, so that its surface will be corroded. After the surface purification film is corroded and damaged, its interior will also be deeply affected. .
Coupled with the self-excited reaction, the surface of the stainless steel forms a pitting reaction and generates small holes. Due to the oxygen ions, a strong corrosive solution can be formed on the surface, which further accelerates the rate of corrosion.
Once intergranular corrosion occurs inside the stainless steel, it can lead to internal intergranular cracking, which further affects the appearance, thereby making the outer surface purification film more destructive.
Therefore, in order to reduce the problem of rust and corrosion of stainless steel, regular maintenance should be carried out to ensure that its appearance is clean, which will help prolong its service life.
When cleaning the stainless steel surface, you should pay attention to whether there are scratches on the surface, avoid scratches on the surface during the cleaning process, prohibit the use of cleaning solutions with bleaching ingredients, and also avoid the use of steel balls, grinding tools, etc., in After cleaning, be sure to use clean water to remove the cleaning agent to avoid residual cleaning agent.
For dust on the surface, generally use a clean cotton cloth to wipe it. If it is a serious stain, it cannot be removed by ordinary methods. You can use soapy water to clean it. For stains with adhesive components, you can use alcohol or organic Solvent (such as ether, benzene, etc.) for scrubbing.
The grease of stainless steel may cause rust and corrosion, so it is necessary to remove the grease on the surface in time. You can use a soft cloth to wipe it. For stubborn grease, you can use neutral detergent or ammonia solution for cleaning.
If it is found that there is bleach or various acids attached to the surface, it should be rinsed with water in time, and then immersed in ammonia solution or neutral carbonated soda water solution. After soaking, use cleaning to clean it.
Sometimes, rainbow patterns also appear on the surface of stainless steel, which is mainly caused by using too much cleaning agent or oil. When cleaning, use a neutral cleaning agent to wash it off. Be careful to use it when rinsing. Warm water works better.
For mild rust on the surface, 10% nitric acid or abrasive cleaning agent can be used for cleaning, or specific cleaning agent can be used for cleaning.
When using Bright White 6mm Thick 304 Stainless Steel Chequered Plate, learn the correct maintenance method, you can keep its surface bright and clean, and prolong its service life.