For the storage environment requirements of er308 er308l er316 stainless steel welding wires, each manufacturer has strict requirements and regulations. Because such products will be easily corroded once they are exposed to air, water, etc. for a long time, and their performance will be greatly reduced after being corroded.
Storage precautions are as follows:
1. For the site or warehouse where er308 er308l er316 stainless steel welding wires products are stored, it should be selected in a clean and tidy place with smooth drainage, away from factories and mines with harmful gases or dust. In addition, the ground should be cleaned of weeds and all debris, and the steel should be kept clean;
2. In the warehouse, it should not be stacked together with materials that are erosive to steel, such as acid, alkali, salt, and Shimin soil. In addition, different varieties of steel should be classified and stacked to avoid confusion and contact with corrosive objects;
3. Large steel pipes, rails, steel plates, large diameter steel pipes, forgings, etc. can be stacked in the open air;
4. Small and medium-sized sections, wire rods, steel bars, medium-diameter steel pipes, steel wires and steel wire ropes can be stored and placed in a shed with satisfactory ventilation, and remember to put the upper and lower pads on it;
5. Small-scale steel, sheet steel, steel strip, small-diameter or special-shaped steel pipe, various cold-rolled, cold-drawn steel and metal products with high price and easy corrosion can be stored and stored in the warehouse;
6. The warehouse is required to maintain a suitable storage background, so we must pay attention to ventilation in sunny days, and pay attention to closing it to prevent moisture in rainy days.
The above are the six points to note about the storage of er308 er308l er316 stainless steel welding wires, I hope it can help you!