Decorative 201 mirror rose gold stainless steel sheet Specification sheet
1.0*1*2/4*8/C 4.0－6.0*1005*C 20.0-25.0*1600*C 35.0*1250*7400
1.2*1*2/4*8/C 8.0*1800*7000↑ 20.0-25.0*1800*C 35.0*1800*5320
1.5*1*2/4*8/C 10.0*880*7000↑ 25.0*1960*6100 50.0↑*1250*7410
2.0*1*2/4*8/C 10.0-16.0*1600*C 30.0*1250*7320 45.0*1250*8100
2.5-3.0*1*2/4*8/C 10.0-16.0*1800*C 32.0*1250*7200 40.0*1250*7100
Decorative 201 mirror rose gold stainless steel sheet: It has the characteristics of acid resistance, alkali resistance, high density, no bubbles in polishing, no pinholes, etc. It is a high-quality material for the production of various watch cases, strap bottom covers, etc. Mainly used to make decorative pipes, industrial pipes, and some shallow-stretched products.
Decorative 201 mirror rose gold stainless steel sheet Chemical composition(%):
Chemicai composition(WT%)(C) Carbon:≤0.15(Si) Silicon:≤0.75(Mn) Manganese:5.5～7.50(Cr) Chromium:16.0～18.0(N) Nitrogen:≤0.25(Ni) Nickel:3.50～ 5.50(P) Phosphorus:≤0.060(S) Sulfur:≤0.030
Decorative 201 mirror rose gold stainless steel sheet Physical properties:
Tensile Strength: 100,000 to 180,000 psi Yield Strength: 50,000 to 150,000 psi Elongation: 55 to 60% Modulus of Elasticity: 29,000,000 psi Density: .280lbs/cubic inch (density 7.93kg/cm3)
Board width: 1000mm, 1220mm, 1250mm, 1500mm, 1800mm, 2000mm;
Cold-rolled section: stainless steel plate cold-rolled 2B (coil, coil, plate);
Feature plate: 3. 5mm—6mm 304/2B, 316L/2B;
Thickness: cold rolled 2B (0.1—6.0mm); Surface: 2B smooth, BA; 8K mirror; brushed, frosted; snow sand; stainless steel without fingerprint plate;
Decorative panels: color plates, titanium-plated plates, etched plates, oil-throwing hairline plates (HL, NO.4), 3D three-dimensional plates, sandblasted plates, embossed plates board, plate);
Thickness: Industrial No.1 (3-159mm) Surface: 8K mirror; brushed, titanium-plated, frosted; snowflake sand; stainless steel without fingerprint plate;
1. Stainless steel plate and material: 304, 316L, 321, 201, (301 coil) domestic stainless steel plate: 430, 409, 201.
2. The thickness of stainless steel plate 304 is 0.12mm-65mm, and the thickness of stainless steel plate 316L# is 0.5mm-16mm.
3. Plate surface treatment: 8K mirror surface, 2B smooth surface, sanding (drawing, sanding), titanium gold, rice grains, oil surface drawing, BA plate 3500, 1219*4000, 1500mm*3000mm, 1500mm*6000mmm, etc.